About this item

• Multiple Kitchen Tools in One: The food slicer has three Interchangeable blades, one peeler, and a brush, which is a great kitchen helper for both novices and old hands. | The food slicer has three Interchangeable blades, one peeler, and a brush, which is a great kitchen helper for both novices and old hands.
• Product upgrade: The diameter of the feed inlet is larger than that of similar products, and the area is increased by 40%. | Easy to put in without picking ingredients. | The diameter of the knife cylinder is increased to solve the problem of short shredding, and the drum can also cut filaments efficiently. | Breaking the traditional hard breaking method, the bolt-type disassembly and assembly can easily remove the blade with one click.
• Safer Cheese Grater: In the process of making food, fingers do not need to touch the blade to avoid scratches on the fingers. | When replacing the blade, place the knife bucket flat on the workbench, press down gently, the blade will be will fall off automatically. | All parts are made of food grade materials BPA free.
• Kitchen Multi-Cut Shredder: Can easily help you with food prep (slicing, chopping, grinding), perfect for grating cheese, shredded carrots, potato chips. | It also works with cucumbers, zucchini, garlic, and even nuts. | The bottom is fully covered with the suction cup, which has a larger area and stronger adsorption force.
• Instructions for Use: 1)Please put the Knife Cartridge into the knife slot hole carefully, align the hand crank with the knife cartridge installation position and snap it into the slot, and tighten the knob clockwise. 2)Press the product down, twist the knob clockwise to lock the suction cup, and it can be used after installation.
• 3)When the height of the ingredients is lower than the feeding port, please press down with the pressing rod to avoid injury. 4)When replacing the blade, place the knife cylinder flat on the table, press down as a whole until the blades on both sides are lifted up, and continue to pull up to pull out the blade. 5) Align the new blade with the gap on both sides of the knife barrel, insert it into the card slot from the bottom, and continue to insert it downward to lock it.